Products
CERBERUS
Intelligent. Adaptable. Mission-Ready.
Octarotor UAV platform for payloads up to 5 kg. Supports onboard AI for semi-autonomous missions, real-time processing, sensor fusion, and object detection. Multiple camera and LiDAR payload options are available for various mission types, including surveillance, SAR, defence, and agriculture.
- Payload capacity: Up to 5 kg
- Maximum take-off weight: 16 kg
- Dimensions (with propellers): 1670 mm diameter × 500 mm height
- Research-grade carbon fiber UAV with detachable cover for easy maintenance and system upgrades
- Automated precision take-off and landing with GNSS support
- Integrated RTK system for centimeter-level positioning accuracy
- Supports multiple payloads including RGB, thermal, multispectral, LiDAR, and aerial seeding systems
- DragonEye2 dual EO-IR stabilized camera
- Micasense RedEdge-MX multispectral camera
- Mag-03MS100 Magnetometer (Bartington Instruments)
F1T
F1T is a tethered UAV, designed to work with Elistair SAFE T 2 – Intelligent Tethered Drone Station, to form a complete UAS. Since the electric power is supplied from the ground, flight time is theoretically unlimited. Drone is typically equipped with a DragonEye2 dual EO-IR stabilized camera, so the system can function as a 360°surveillance system from a height of up to 100m above the ground station.
- Max altitude of flight: 100m from ground (restriction of the tethering cable length)
- Max payload weight: 1kg
- Max take-off weight: 7,5kg (weight of 100m cable included)
- Emergency backup battery: Yes
- Precision automated take-off/landing: Yes (equipped with GNSS antenna)
- Easily detachable cover: Yes
- Other payloads available at request
Dioptra
DIOPTRAÂ is an electric tailsitter fixed wing UAV with VTOL characteristics that is currently under development. Dioptra has been designed to host Micasense RedEdge Mx which is a rugged and precise multispectral camera for advanced agricultural analysis. This high-performance tool captures all of the spectral bands needed for crop health indices (green, red, red edge, and near-infrared), as well as a blue band for deeper insights into specific issues and composite RGB imagery.
- Empty Weight: 2.260 kg (Battery is not included)
- Wing Span: 1440 mm
- Fuselage: 520 mm
- Cruising speed: 16 m/s
- Battery Type: LiPo
- Estimated Flight Time: 60 min
- Precision automated take-off and landing Vertically (equipped with GNSS antenna)
- Autonomous Flight
- Support FPV flight with analogue camera (Foxeer T-Rex mini 1500 VTL)
- There are no control surfaces (ailerons, elevators, or rudder) and the direction is changed using a differential steering mechanism
- One-button Return to Home (RTO) function
OPTIONAL PAYLOAD:
MicaSense RedEdge Mx | Payload Weight: 0.232 kg
Saita
SAITAÂ is a medium size dodecarotor UAV. It is a quiet agile and very steady drone due to its six pairs of coaxial motors. This mechanical characteristic also gives it an increased robustness against potential motor and/or ESC faults. It is mainly used for filming purposes using lightweight action cameras.
- Max payload weight: 0.4kg
- Max take-off weight: 2.8kg
-Average payload flight time 10 min
- Precision automated take-off/landing: Yes
- Action camera
Dummy
DUMMYÂ is a low cost, lightweight UAV, which consists mainly of 3D printed parts. Its simple design with just four rotors and a low-profile landing gear, makes it easy to control, and thus it constitutes an ideal drone for testing flight algorithms. To further enhance this capability, Dummy can be equipped with a raspberry Pi (3,4) single-board computer.
- Max payload weight: 0.2kg
- Max take-off weight: 1.3kg
- Average payload flight time: 18 min
- Precision automated take-off/landing: Yes
- 3D printed body and landing gear
MANTIS
MANTIS is a quad-rotor UAV designed to perform autonomous obstacle avoidance missions. It is equipped with the powerful NVIDIA Jetson Nano for onboard computation, enabling it to run advanced avoidance algorithms. MANTIS integrates a ZED Mini RGB-D camera, optimized for depth and motion detection, to assist with obstacle identification. With support for QGroundControl and Mission Planner, it allows autonomous waypoint missions.
- Maximum payload weight: 0.120 kg
- Maximum take-off weight: 2.400 kg
- Precision automated take-off/landing: Yes
CERBERUS II
Industrial-Grade. Endurance-Optimized. Mission-critical.
Quad-rotor UAV platform for payloads up to 10 kg. Features a redundant design and is ruggedized for harsh environments in VLOS/BVLOS missions. Equipped with an onboard AI computer and AIS receiver. Supports various payloads for surveillance, SAR, and defence missions.
- Payload capacity: Up to 10 kg
- Maximum take-off weight: 25 kg
- Dimensions (with propellers): 1820 × 1820 mm; height: 600 mm
- Foldable-arm design for compact transportation (900 × 900 × 600 mm)
- Redundant avionics and fault-tolerant architecture
- User-friendly mission planning and real-time telemetry interface
- Parachute-based fail-safe mechanism
- Designed for maritime environments and high-wind operations
- Supports mission-specific sensor integration up to 10 kg
- Custom payload configurations depending on operational needs
